BLUETOOTH BATTERY MONITOR Victron Smart Battery Sense Long Range (up to 10m) SBS050150200
Free Shipping Australia Wide
WORKS WITH ANY DEEP CYCLE BATTERY TYPE ( LIFEPO4 - AGM - GEL )
After being connected to the battery, connect the monitor to a mobile device (phone or tablet) via the Victron Mobile App. This Smart Battery Sense Monitor is a wireless battery voltage and temperature sensor. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
> SIMPLE TO INSTALL & USE
Simply Connect the two eyelets to your battery terminals and attach the unit directly onto the battery-body using its self-adhesive strip. For banks of batteries Smart Battery Sense may be connected to any one of the individual batteries.
Use the VictronConnect App to configure, monitor, update and diagnose your Victron product. Available for Android, iOS, Windows, and macOS X. It can connect to Victron products via Bluetooth, USB and WiFi/LAN/Internet. Learn More about the Victron App
Improves Battery Charging- By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.
Comes with Free Shipping Australia Wide
REMOTE MONITORING AND CONTROL
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
A Bluetooth Smart enabled VE.Bus interface
Communicates system information straight to your smart phone using the free-to-use VictronConnect app
Used with Multi- inverter/chargers
Provides on-battery temperature and voltage sensing capabilities
Able to sense battery temperature in two ways
Victron Energy Smart Battery Sense Long Range (Up To 10M) is a Bluetooth Smart enabled VE.Bus interface with battery temperature-and-voltage sensing. It communicates system information straight to your smart phone using the free-to-use VictronConnect App.
When used with Multi- inverter/chargers the dongle provides on-battery temperature and voltage sensing capabilities, allowing compensation for possible cable losses which can occur during charging and discharging. Temperature sensing allows accurate temperature-compensation during battery charge cycles. The dongle is, at present, the only way to add an “on-battery” sensing capability to the MultiPlus-II models, if they are not also connected to a GX device and CANbus battery.The dongle can be used in systems with or without a GX device - such as the CCGX. In systems with a GX device and another source of temperature and voltage data (eg from a CANbus battery), the CCGX data will override temperature and voltage information from the dongle. In this role the dongle will still provide live-information via its VictronConnect interface; and it will provide firmware updates without requiring an internet connection. When the dongle is used in systems which do not have a GX device, the dongle's voltage and temperature data becomes the primary source of that information and can be used by other connected devices for voltage compensation. At this time, the VE.Bus Smart dongle cannot send its temperature and voltage data as part of a VE.Smart network. The VE.Bus Smart dongle is able to sense battery temperature in two ways: The default method is the dongle's on-board temperature sensor. When the dongle is mounted directly onto the battery case (using its adhesive attachment) it will sense the battery temperature directly from the battery casing.
NEED A 12V LITHIUM BATTERY CHARGER (LIFEPO4) ?
DC-DC Charging For Lithium Batteries
Regarding DC-DC Chargers and solar controllers, you must change these to LiFePO4-specific models, which can charge your Lithium batteries to an entire 100% State of Charge.**If you are charging from an alternator, you will need a DC-DC Charger that is designed to manage solar specific to lithium (LiFEPO4).
Smart Battery Sense long range (up to 10m) is a wireless battery voltage-and-temperature sensor for Victron MPPT Solar Chargers. The Solar Charger uses these measurements to optimise its charge parameters.
> Voltage and Temperature Sense
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
> Improves Battery Charging
By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.
> No Wires
The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart. Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app.
Tidy, Simple - Smart
Installation is simple, quick and tidy. Just connect the unit's two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip.
Looking for an MPPT Learn More ?
MPPT charge controllers can be a powerful component of your solar system. They not only manage the charging of the battery bank from the solar panels, but they are also able to convert the higher voltage of the solar array to the lower voltage of the battery bank. This allows you to design highly efficient solar systems.** You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A
USE THE HANDY CALCULATOR BELOW
LEARN MORE: MPPT 100/20, the first number is the maximum PV open circuit voltage. The second number, 20, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations. For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?
Australian Owned & Operated
Designed for Off Road and Heavy Duty Applications
Perfect for use in caravans, marine, camping and home storage off grid applications. Solar, wind or battery charger compatible. Designed to handle the vibration when off road.
Reliable 12V Power
Campers appreciate being able to charge multiple devices simultaneously while enjoying a peaceful camping experience.
Portable Power Solutions
Superior Versatility: This MPPT is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles and boats.
Easy to Use and Setup
This plug-and-play MPPT is so user-friendly that anyone can set it up. Multiple Protection: Over-charge, short circuit, over-temperature, over-voltage, solar input overload and reverse polarity protection are incorporated.
BLUETOOTH BATTERY MONITOR Victron Smart Battery Sense Long Range (up to 10m) SBS050150200
Free Shipping Australia Wide
WORKS WITH ANY DEEP CYCLE BATTERY TYPE ( LIFEPO4 - AGM - GEL )
After being connected to the battery, connect the monitor to a mobile device (phone or tablet) via the Victron Mobile App. This Smart Battery Sense Monitor is a wireless battery voltage and temperature sensor. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
> SIMPLE TO INSTALL & USE
Simply Connect the two eyelets to your battery terminals and attach the unit directly onto the battery-body using its self-adhesive strip. For banks of batteries Smart Battery Sense may be connected to any one of the individual batteries.
Use the VictronConnect App to configure, monitor, update and diagnose your Victron product. Available for Android, iOS, Windows, and macOS X. It can connect to Victron products via Bluetooth, USB and WiFi/LAN/Internet. Learn More about the Victron App
Improves Battery Charging- By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.
Comes with Free Shipping Australia Wide
REMOTE MONITORING AND CONTROL
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
A Bluetooth Smart enabled VE.Bus interface
Communicates system information straight to your smart phone using the free-to-use VictronConnect app
Used with Multi- inverter/chargers
Provides on-battery temperature and voltage sensing capabilities
Able to sense battery temperature in two ways
Victron Energy Smart Battery Sense Long Range (Up To 10M) is a Bluetooth Smart enabled VE.Bus interface with battery temperature-and-voltage sensing. It communicates system information straight to your smart phone using the free-to-use VictronConnect App.
When used with Multi- inverter/chargers the dongle provides on-battery temperature and voltage sensing capabilities, allowing compensation for possible cable losses which can occur during charging and discharging. Temperature sensing allows accurate temperature-compensation during battery charge cycles. The dongle is, at present, the only way to add an “on-battery” sensing capability to the MultiPlus-II models, if they are not also connected to a GX device and CANbus battery.The dongle can be used in systems with or without a GX device - such as the CCGX. In systems with a GX device and another source of temperature and voltage data (eg from a CANbus battery), the CCGX data will override temperature and voltage information from the dongle. In this role the dongle will still provide live-information via its VictronConnect interface; and it will provide firmware updates without requiring an internet connection. When the dongle is used in systems which do not have a GX device, the dongle's voltage and temperature data becomes the primary source of that information and can be used by other connected devices for voltage compensation. At this time, the VE.Bus Smart dongle cannot send its temperature and voltage data as part of a VE.Smart network. The VE.Bus Smart dongle is able to sense battery temperature in two ways: The default method is the dongle's on-board temperature sensor. When the dongle is mounted directly onto the battery case (using its adhesive attachment) it will sense the battery temperature directly from the battery casing.
NEED A 12V LITHIUM BATTERY CHARGER (LIFEPO4) ?
DC-DC Charging For Lithium Batteries
Regarding DC-DC Chargers and solar controllers, you must change these to LiFePO4-specific models, which can charge your Lithium batteries to an entire 100% State of Charge.**If you are charging from an alternator, you will need a DC-DC Charger that is designed to manage solar specific to lithium (LiFEPO4).
Smart Battery Sense long range (up to 10m) is a wireless battery voltage-and-temperature sensor for Victron MPPT Solar Chargers. The Solar Charger uses these measurements to optimise its charge parameters.
> Voltage and Temperature Sense
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
> Improves Battery Charging
By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage. For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.
> No Wires
The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart. Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app.
Tidy, Simple - Smart
Installation is simple, quick and tidy. Just connect the unit's two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip.
Looking for an MPPT Learn More ?
MPPT charge controllers can be a powerful component of your solar system. They not only manage the charging of the battery bank from the solar panels, but they are also able to convert the higher voltage of the solar array to the lower voltage of the battery bank. This allows you to design highly efficient solar systems.** You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A
USE THE HANDY CALCULATOR BELOW
LEARN MORE: MPPT 100/20, the first number is the maximum PV open circuit voltage. The second number, 20, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations. For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?
Australian Owned & Operated
Designed for Off Road and Heavy Duty Applications
Perfect for use in caravans, marine, camping and home storage off grid applications. Solar, wind or battery charger compatible. Designed to handle the vibration when off road.
Reliable 12V Power
Campers appreciate being able to charge multiple devices simultaneously while enjoying a peaceful camping experience.
Portable Power Solutions
Superior Versatility: This MPPT is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles and boats.
Easy to Use and Setup
This plug-and-play MPPT is so user-friendly that anyone can set it up. Multiple Protection: Over-charge, short circuit, over-temperature, over-voltage, solar input overload and reverse polarity protection are incorporated.
once again just so professional all the way, and fast delivery
Great service and product.
Bought 2 of these to monitor individual capacity and temperature of Lithium batteries. Awesome and easy to setup.— Christopher E
easy to install
very good product and easy to install , paired up with my phone straight away— Brad H
These things are great
This monitor works. App works, even with multiple batteries. All Bluetooth and can link to computer for remote monitoring, which I did not do but I see where you can. So simple even a caveman can do it !— Jimmy
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Aussie Batteries & Solar’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Aussie Batteries & Solar’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is . Our ABN is 51 640 926 718. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.
.gif)
.png)
.png)
.png)
Designed for Off Road and Heavy Duty Applications
