Victron Blue Smart IP65 Charger 12V IP65 SLA/LiFePO4 + DC Connector
WAS $399.00
RRP $399.00
50% OFF
NOW $199
At a glance
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Victron Blue Smart IP65 Charger 12V IP65 SLA/LiFePO4 + DC Connector (230V)
CHOOSE YOUR OPTION UP TO 10AMPS
WORKS WITH ANY DEEP CYCLE BATTERY TYPE ( LIFEPO4 - AGM - GEL )
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.Li-ion battery mode.The Blue Smart Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
This package comes supplied with:
-12V Charger (AU/NZ Plug) (CHOOSE YOUR OPTION)
-Lead to Alligator Clamps
-Lead to M8 eyelet
VICTRON Blue Smart IP65 Charger Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Potential recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Temperature compensated charging
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Ultra high 95% efficiency “green” battery charger
- Setup and configure, readout of voltage and current by Bluetooth Smart
Suitable for using Lithium, AGM, GEL and Lead Acid chemistries in automotive, marine, off-grid, lithium, caravan, camper, motorbike, and more.The chargers come with preset settings; however, they can be reconfigured if required using the VictronConnect App
Recovery Function for Fully Discharged Batteries- Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. This Blue Smart Charger h owever will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals. Also, if caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage which this battery charger is designed to do.
Seamless Wireless Control and Real-Time Updates
Experience the convenience of Bluetooth integration that brings smart wireless monitoring to your fingertips. Effortlessly control and modify charger settings, and keep your system updated with the VictronConnect app—transforming your mobile device into a sophisticated energy management console.
The battery is charged, smartly... to perfect condition- The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Connect the battery with ease- The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely- The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
The VictronConnect app- Setup, readout and configure your Blue Smart IP65 Charger via your smartphone.
You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available. Download your app for iOS and Android here at https://www.victronenergy.com/live/victronconnect:start
Storage Mode: less corrosion of the positive plates- Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature Compensated Charging- The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion Battery Mode- The Blue Smart Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Comes with Free Shipping Australia Wide
REMOTE MONITORING AND CONTROL
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available:
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
> RELIABLE SOLUTIONS
Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Low thermal stress on electrical components for longterm reliability
> ELECTRONIC PROTECTION
Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C
> BATTERY ENHANCING FEATURES
Several other battery life enhancing features Low power mode to charge smaller batteriesL LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection
> SETUP AND CONFIGURE POWER READOUTS
Setup and configure, readout of voltage and current by Bluetooth Smart Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius
> EASY TO USE - The MODE Button:
You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly.
For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds.
> TEMPERATURE PROTECTION
The output current will reduce at high ambient temperature..
Your battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Looking for an MPPT Learn More ?
MPPT charge controllers can be a powerful component of your solar system. They not only manage the charging of the battery bank from the solar panels, but they are also able to convert the higher voltage of the solar array to the lower voltage of the battery bank. This allows you to design highly efficient solar systems.** You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A
USE THE HANDY CALCULATOR BELOW
LEARN MORE: MPPT 100/20, the first number is the maximum PV open circuit voltage. The second number, 20, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations. For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?
Australian Owned & Operated
Designed for Off Road and Heavy Duty Applications
Perfect for use in caravans, marine, camping and home storage off grid applications. Solar, wind or battery charger compatible. Designed to handle the vibration when off road.
Reliable 12V Power
Campers appreciate being able to charge multiple devices simultaneously while enjoying a peaceful camping experience.
Portable Power Solutions
Superior Versatility: This MPPT is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles and boats.
Easy to Use and Setup
This plug-and-play MPPT is so user-friendly that anyone can set it up. Multiple Protection: Over-charge, short circuit, over-temperature, over-voltage, solar input overload and reverse polarity protection are incorporated.
Victron Blue Smart IP65 Charger 12V IP65 SLA/LiFePO4 + DC Connector (230V)
CHOOSE YOUR OPTION UP TO 10AMPS
WORKS WITH ANY DEEP CYCLE BATTERY TYPE ( LIFEPO4 - AGM - GEL )
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.Li-ion battery mode.The Blue Smart Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
This package comes supplied with:
-12V Charger (AU/NZ Plug) (CHOOSE YOUR OPTION)
-Lead to Alligator Clamps
-Lead to M8 eyelet
VICTRON Blue Smart IP65 Charger Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Potential recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Temperature compensated charging
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Ultra high 95% efficiency “green” battery charger
- Setup and configure, readout of voltage and current by Bluetooth Smart
Suitable for using Lithium, AGM, GEL and Lead Acid chemistries in automotive, marine, off-grid, lithium, caravan, camper, motorbike, and more.The chargers come with preset settings; however, they can be reconfigured if required using the VictronConnect App
Recovery Function for Fully Discharged Batteries- Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. This Blue Smart Charger h owever will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals. Also, if caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage which this battery charger is designed to do.
Seamless Wireless Control and Real-Time Updates
Experience the convenience of Bluetooth integration that brings smart wireless monitoring to your fingertips. Effortlessly control and modify charger settings, and keep your system updated with the VictronConnect app—transforming your mobile device into a sophisticated energy management console.
The battery is charged, smartly... to perfect condition- The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Connect the battery with ease- The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely- The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
The VictronConnect app- Setup, readout and configure your Blue Smart IP65 Charger via your smartphone.
You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available. Download your app for iOS and Android here at https://www.victronenergy.com/live/victronconnect:start
Storage Mode: less corrosion of the positive plates- Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Temperature Compensated Charging- The optimal charge voltage of a lead-acid battery varies inversely with temperature. The Blue Smart IP65 Charger measures ambient temperature during the test phase and compensates for temperature during the charge process. The temperature is measured again when the charger is in low current mode during float or storage. Special settings for a cold or hot environment are therefore not needed.
Li-ion Battery Mode- The Blue Smart Charger uses a specific charging algorithm for Li-ion (LiFePO₄) batteries, with automatic Li-ion under voltage protection reset.
Comes with Free Shipping Australia Wide
REMOTE MONITORING AND CONTROL
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available:
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
> RELIABLE SOLUTIONS
Water, dust and chemical resistant Seven step smart charge algorithm with up to 95% efficiency Low thermal stress on electrical components for longterm reliability
> ELECTRONIC PROTECTION
Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation Automatic power supply function Severe cold performance: down to -30°C
> BATTERY ENHANCING FEATURES
Several other battery life enhancing features Low power mode to charge smaller batteriesL LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection
> SETUP AND CONFIGURE POWER READOUTS
Setup and configure, readout of voltage and current by Bluetooth Smart Reverse Polarity, Short Circuit & Over Temperature protection Operating Temperatures: -30 to +50 deg celcius
> EASY TO USE - The MODE Button:
You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly.
For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds. The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds.
> TEMPERATURE PROTECTION
The output current will reduce at high ambient temperature..
Your battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Looking for an MPPT Learn More ?
MPPT charge controllers can be a powerful component of your solar system. They not only manage the charging of the battery bank from the solar panels, but they are also able to convert the higher voltage of the solar array to the lower voltage of the battery bank. This allows you to design highly efficient solar systems.** You take the total watts of the solar array divided by the voltage of the battery bank. That will give you the output current of the charge controller. For example, a 1000W solar array ÷ 24V battery bank = 41.6A. The rating of the charge controller should be at least 40A
USE THE HANDY CALCULATOR BELOW
LEARN MORE: MPPT 100/20, the first number is the maximum PV open circuit voltage. The second number, 20, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations. For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?
Australian Owned & Operated
Designed for Off Road and Heavy Duty Applications
Perfect for use in caravans, marine, camping and home storage off grid applications. Solar, wind or battery charger compatible. Designed to handle the vibration when off road.
Reliable 12V Power
Campers appreciate being able to charge multiple devices simultaneously while enjoying a peaceful camping experience.
Portable Power Solutions
Superior Versatility: This MPPT is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, campervans, commercial vehicles and boats.
Easy to Use and Setup
This plug-and-play MPPT is so user-friendly that anyone can set it up. Multiple Protection: Over-charge, short circuit, over-temperature, over-voltage, solar input overload and reverse polarity protection are incorporated.
Straight out of the box this is the best battery c
The Bluetooth functionality is very useful and well I achieved well over 12m of range. I haven’t tested all the functions yet but so far so good. Quick postage and the excellent website interface makes purchasing a breeze.— Marco
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Aussie Batteries & Solar’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Aussie Batteries & Solar’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is . Our ABN is 51 640 926 718. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.
.png)
.jpg)
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
.png)
.png)
Designed for Off Road and Heavy Duty Applications
.png)
